为了高效的发挥阻燃保送带运输作用，同时为了有效的延长阻燃保送带的正常运用寿命。在我们运用阻燃保送带的过程之中，阻燃保送带防止发作跑偏，应及时的采取措施纠正。不同类型、规格层数的阻燃保送带是不可接在一同运用的，阻燃保送带接头好是采用胶接的办法。阻燃保送带运转速度普通不宜大于规范速度，块度大、磨损性大的物料和运用固定梨的卸料安装应尽量可采用低速效率。
In order to effectively play the role of flame-retardant belts, and to effectively extend the normal service life of flame-retardant belts. In the process of using fire-retardant belts, fire-retardant belts should be corrected in time to prevent the occurrence and deviation. Flame-retardant belts of different types and layers of specifications can not be used together. The best way to connect the flame-retardant belts is to use gluing method. The running speed of flame retardant belts should not be higher than the normal speed. The material with large block size and wear resistance and the unloading installation of fixed pears should adopt low speed efficiency as far as possible.
滚筒保送机的传动滚筒直径和阻燃保送带布层的关系、传动滚筒、改向滚筒的配套及其托辊槽角的请求应依据运输机的设计规则去合理的选取。 给料方向应顺阻燃保送带的运转相关方向，为了减小物料下落时对阻燃保送带的冲击应采溜槽，以减小物料落差的间隔，完成阻燃保送带受料段，应该缩短托辊间距与采用缓冲托辊作为漏料，阻燃保送带顺应的是采用柔软适度的挡料板，防止档料板过硬，刮破阻燃保送带的整体带面。保送机设备运用时，如有托辊短少的状况，应该及时添加及修好，完成托辊被物料掩盖，从而形成回转不灵，避免漏料卡于滚筒与胶带之间的状况，留意阻燃保送带活动局部光滑效果，但不可油污到阻燃保送带。全面防止阻燃保送带遭受机架，支柱或是块状物料的阻滞，避免的碰破扯裂，发现阻燃保送带部分破损的应用人造棉及时修补防止扩展。
The relationship between the diameter of the driving drum and the layers of the flame retardant belt, the matching of the driving drum, the changing drum and the groove angle of the supporting roll of the drum conveyor should be reasonably selected according to the design rules of the conveyor. The feeding direction should follow the relevant direction of the operation of the flame-retardant conveyor belt. In order to reduce the impact of material falling on the flame-retardant conveyor belt, chute should be used to reduce the gap between materials and complete the receiving section of the flame-retardant conveyor belt. The spacing of idlers should be shortened and the buffer roller should be used as leakage material. The flame-retardant conveyor belt complies with the adoption of a soft and moderate baffle plate to prevent the baffle from overhardening and scraping the flame retardant. The overall belt surface of the delivery belt. When using the conveyor equipment, if there is a shortage of supporting rollers, it should be added and repaired in time to complete the covering of supporting rollers by materials, so as to form an ineffective rotation, avoid leakage stuck between the drum and tape, pay attention to the smooth effect of the flame retardant conveyor belt, but not oil stain to the flame retardant conveyor belt. Fully prevent the flame retardant delivery belt from being blocked by rack, pillar or block material, avoid breaking and tearing, and find that the flame retardant delivery belt is partially damaged by man-made cotton timely repair to prevent expansion.
为了高效的发挥阻燃保送带的运输作用，同时也为了有效的延长阻燃保送带的运用寿命。在我们运用阻燃保送带的过程中：
In order to give full play to the transport function of flame-retardant belts, and at the same time to extend the service life of flame-retardant belts most effectively. In the process of using flame retardant belts:
避免阻燃保送带负荷启动；阻燃保送带发作跑偏，应及时采取措施纠正。不同类型、规格层数的阻燃保送带不宜接在一同运用，其接头好采用胶接法。阻燃保送带的类型、构造、规格、层数应依据运用条件合理选用。阻燃保送带运转速度普通不宜大于2.5m/s，块度大，磨损性大的物料和运用固定梨的卸料安装应尽量采用低速。
Avoid starting the fire-retardant delivery belt with load; take timely measures to correct the deviation of the fire-retardant delivery belt when it breaks out. Flame-retardant belts of different types and layers of specifications should not be joined together, and their joints should be bonded. The type, structure, specifications and layers of flame retardant belts should be selected reasonably according to the operating conditions. Flame-retardant belts should not run faster than 2.5m/s. Materials with large fragmentation and wear resistance and unloading installation of fixed pears should be installed at a low speed as far as possible.
滚筒保送机的传动滚筒直径与阻燃保送带布层的关系、传动滚筒、改向滚筒的配套以及对托辊槽角的请求应依据运输机的设计规则,合理选取。给料方向应顺阻燃保送带的运转方向，为减小物料下落时对阻燃保送带的冲击应采溜槽，减小物料落差间隔；阻燃保送带受料段，应缩短托辊间距和采用缓冲托辊为漏料，阻燃保送带顺应采用柔软适度的挡料板，以免档料板过硬，刮破阻燃保送带的带面。保送机在运用时，如有托辊短少，应及时添加及修好；托辊被物料掩盖，形成回转不灵，避免漏料卡于滚筒与胶带之间，留意阻燃保送带活动局部的光滑，但不得油污阻燃保送带。防止阻燃保送带遭受机架，支柱或块状物料的阻滞，避免碰破扯裂，发现阻燃保送带部分破损时，应用人造棉及时修补，以免扩展。
The relationship between the diameter of the driving drum and the layers of the flame retardant belt, the matching of the driving drum, the reversing drum and the request for the groove angle of the supporting roll of the drum conveyor should be reasonably selected according to the design rules of the conveyor. The feeding direction should follow the running direction of the flame-retardant conveyor belt. In order to reduce the impact of material falling on the flame-retardant conveyor belt, chute should be used to reduce the material drop interval. In the receiving section of the flame-retardant conveyor belt, the spacing of idlers and the use of buffer idlers as leaks should be shortened. The flame-retardant conveyor Belt should comply with the use of soft and moderate baffles, so as not to make the baffle plate too hard and scrape the surface of the flame-retardant conveyor When using the conveyor, if the idler is short, it should be added and repaired in time; the idler is covered by the material, resulting in ineffective rotation, so as to avoid leakage between the drum and the tape, and pay attention to the smooth movement of the flame retardant conveyor belt, but not oil pollution and flame retardant conveyor belt. Prevent the flame retardant belt from being blocked by rack, pillar or block material, avoid breaking and tearing, and apply artificial cotton to repair part of the flame retardant belt when it is found to be damaged, so as to avoid expansion.
本文由 食品级输送带整理发布，您是不是对这些内容有所了解了呢?的内容请点击：https://www.everla.cn我们会有精彩内容等你查看。
This article is organized and published by food-grade conveyor belt. Do you have any idea about these contents? For more information, please click: https://www.everla.cn. We will have more wonderful content for you to check.
