尼龙输送带适用于常温下输送非腐蚀性的无尖刺的块状粒状粉末的多种物料如煤炭焦炭 砂石 [shā shí] 水泥等散物（料）或成件物品，输送堆积密度为6.5~2.5t/m3的各种块状粒状粉状等松散状物料，也可用于成体物品输送。
Nylon conveyor belt is suitable for conveying non corrosive bulk granular powder materials such as coal, coke, sand, cement and other bulk materials or finished articles at room temperature. It can also be used for conveying bulk materials with bulk density of 6.5 ~ 2.5t/m3.
不同类型规格(specifications)层数的输送带不宜接在共同使用，其接头更好采用胶接法。
Different types and specifications of conveyor belts with different layers are not suitable for joint use, and the joint is best to use adhesive bonding method.
输送胶带的类型 结构 [jié gòu] 规格(specifications)层数应根据使用条件合理选用。
The type and structure of conveyor belt and the number of layers should be reasonably selected according to the service conditions.
输送胶带运行速度一般不宜大于2.5米/秒，块度大，磨损性大的物料和使用固定(fixed)梨的 卸料装置应尽量采用低速。
In general, the running speed of conveyor belt should not be greater than 2.5 m / s. low speed should be used as far as possible for materials with large block size and wear and unloading device using fixed pear.
运输机的传动滚筒直径与输送带布层的关系传动滚筒改向滚筒的配套以及对 托辊 槽角 [cáo jiǎo] 的要求应根据运输机的设计规定，合理选取。
The relationship between the diameter of transmission drum and the distribution of conveyor belt, the matching of driving drum to drum and the requirements of idler groove angle should be selected reasonably according to the design regulations of conveyor.
给料方向应顺胶带的运行方向，为减小物料下落时对胶带的冲击应采溜槽，减小 物料 [wù liào] 下落距 离；胶带受料段应缩短托辊间距和采用缓冲托辊为漏料，带顺应采用柔软适当程度的挡料板，以免 档料板过硬，刮破输送带的带面。
The feeding direction should be along the running direction of the belt. In order to reduce the impact of the material falling on the belt, the chute should be adopted to reduce the falling distance of the material. The distance between the rollers should be shortened in the receiving section of the belt. The buffer roller should be used as the leakage material. The belt should be flexible and appropriate baffle plate should be used to prevent the baffle plate from being too hard and scraping the belt surface of the conveyor belt.
尼龙输送带在使用中，避免托辊(支撑输送带和物料重量)被物料覆盖，造成回转不灵，防止漏料卡于滚筒与胶带之间，注意(attention)活动部分的润滑， 但不得油渍污垢输送胶带；避免带负荷启动； 胶带发生 跑偏 [pǎo piān] ，应用时采取措施（指针对问题的解决办法)纠正； 发现胶带局部（part)损人造棉应用时修补，以免扩大故障范围。尼龙输送带，其中间夹层帆布为尼龙帆布。 尼龙（NN）输送带具有带体薄强力高耐冲击，成槽性好，层间粘合力大，屈挠性优异及使用寿命长等特点，适用于中长距离，较高载量，高速条件下输送物料，广泛用于矿山煤场化工冶金建筑港口等部门。
In the use of nylon conveyor belt, the idler (supporting conveyor belt and material weight) should be avoided from being covered by materials, which would cause inflexible rotation and prevent material leakage from being stuck between the drum and the belt. Attention should be paid to the lubrication of the moving part, but oil stain and dirt should not be allowed to transport the belt; the belt should not be started with load; the belt deviation [P ǎ o PI ā n] should be avoided In order to avoid expanding the fault range, measures should be taken to correct the problem during application (the solution to the problem) should be taken to correct the problem; when the part of the tape is found to be damaged, repair should be made when using cotton to avoid expanding the fault range. Nylon conveyor belt, the interlayer canvas is nylon canvas. Nylon (NN) conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good grooving, strong interlayer adhesion, excellent flexibility and long service life. It is suitable for conveying materials under medium and long distance, high load and high speed. It is widely used in mining, coal yard, chemical metallurgy, construction port and other departments.
以上的内容就是大倾角输送带为大家介绍的今日内容，内容还请大家关注网站：https://www.everla.cn 我们会定期更新新的知识与内容为大家呈现.
The above content is the content of today introduced by the large angle conveyor belt. For more information, please pay attention to the website: https://www.everla.cn We will regularly update new knowledge and content for you to present
