管状钢丝绳芯输送带的知识有哪些?以下有食品级输送带厂向大家介绍，希望我们的介绍能更好的帮助到大家。
What is the knowledge of tubular steel cord conveyor belt? Below is a food-grade conveyor belt factory to introduce to you, I hope our introduction can better help you.
1. 普通钢丝绳芯输送带由上包胶、钢丝绳芯、下包胶和侧包胶组成。钢丝绳按一定间隙均匀排列。由于钢丝绳芯输送带在直线运输过程中需要设置匝数，传统的钢丝绳芯输送带与钢丝绳间距分布均匀，相对致密且强度大，不易设置成弯曲形状。此外，在输送带转弯的过程中，应考虑转弯半径，过大的转弯半径会使输送的物料向外滚压导致飞溅。
1. Common steel cord conveyor belt is composed of upper glue, steel cord, lower glue and side glue. Wire ropes are arranged evenly according to a certain clearance. Because the number of turns of steel cord conveyor belt needs to be set in the process of linear transportation, the distance between the traditional steel cord conveyor belt and the steel wire rope is evenly distributed, relatively dense and strong, so it is not easy to set into a bending shape. In addition, in the process of conveyor belt turning, the turning radius should be considered. Excessive turning radius will cause the conveyor material to roll outward and cause spatter.
考虑到管状输送带可以在小半径的三维空间内实现转弯，避免中间换乘站;在运输作业中，
Considering that the tubular conveyor belt can turn in a small radius of three-dimensional space to avoid the intermediate transfer station, in transport operations,
2、物料被包裹在管道中，在设计制造中需要考虑刚性要求，并增加物料与输送带之间的挤压压力，因此输送带的运行阻力系数大于一般的带式输送机。因此，平带运输可与管状运输相结合，使钢丝绳芯输送带在运行过程中可转化为管状运输。所以我们可以减少钢丝绳两端的根数，增加两端的间距，这样钢丝绳就可以弯曲成管状。然而，两端根数的减少不可避免地会导致两端强度的降低，这很容易导致管道在管状部位发生坍塌。为了解决这个问题，我们可以在这里添加一个加固层来增加横向刚度，即在包覆胶和钢丝绳之间加入钢丝网，钢丝网分为斜交钢丝网。
2. Material is wrapped in pipeline. In design and manufacture, rigidity requirements should be considered, and the extrusion pressure between material and conveyor belt should be increased. Therefore, the resistance coefficient of conveyor belt is larger than that of general belt conveyor. Therefore, flat belt transportation can be combined with tubular transportation, so that the steel cord conveyor belt can be converted into tubular transportation in the process of operation. So we can reduce the number of roots at both ends of the wire rope and increase the distance between the two ends so that the wire rope can be bent into tubular shape. However, the reduction of the number of elements at both ends will inevitably lead to the reduction of the strength at both ends, which can easily lead to the collapse of the pipeline in the tubular part. To solve this problem, we can add a reinforcement layer here to increase the transverse stiffness, that is, to add a wire mesh between the coated rubber and the wire rope, which is divided into oblique wire mesh.
通过对钢丝绳输送带生产厂家的介绍，管状钢丝绳芯输送带你了解了吗?想要学习的输送带知识，请继续关注我们:http://www.everla.cn
By introducing the manufacturer of wire rope conveyor belt, do you understand the tubular steel rope core conveyor belt? If you want to learn more about the conveyor belt, please continue to pay attention to us: http://www.everla.cn
