欢迎访问擎川机电设备有限公司网站!
定制咨询热线13533070862
擎川EVERLA > 知识问答 > 耐热输送带皮带主要应用的行业!

知识问答

联系我们

擎川机电设备有限公司

邮 箱:everlas@163.com
手 机:135-3307-0862
电 话:400-9688-278
地 址:广东省广州市天河区东圃镇宦溪西路宦溪工业区12号A栋

耐热输送带皮带主要应用的行业!

作者:擎川EVERLA输送带厂家 来源: 网络整理 更新时间:2021-07-22 11:14:40人气:

耐热输送带主要用于冶金、建筑等行业的原因是什么?下面有输送带厂家介绍给您,希望我们的介绍能更好的帮助您。

  What are the reasons why heat-resistant conveyor belts are mainly used in metallurgy, construction and other industries? Below are some conveyor belt manufacturers to introduce to you, I hope our introduction can help you better.



  1. 输送带保护层采用三元乙丙橡胶,骨架材料采用国产耐高温帆布。独特的配方设计,解决了三元乙丙橡胶层间饱和度高、附着力差、附着力低等关键问题。寿命长(约2-4倍),体轻,耐热性好。输送带采用耐高温输送带,物料温度不超过800℃,表面温度不超过220℃。主要用于冶金、建筑等行业输送烧结矿、焦炭、水泥熟料等高温物料。

  1. Ethylene-propylene-diene rubber is used as the protective layer of conveyor belt, and domestic high-temperature canvas is used as the framework material. The unique formulation design solves the key problems of high interlayer saturation, poor adhesion and low adhesion of EPDM. Long life (about 2-4 times), light weight, good heat resistance. The conveyor belt adopts high temperature resistant conveyor belt. The material temperature does not exceed 800 ~C and the surface temperature does not exceed 220 ~C. Mainly used in metallurgy, construction and other industries to transport sinter, coke, cement clinker and other high-temperature materials.

  2. 突出的耐热输送带的特点是带体轻、寿命长(约2-4倍)、耐热性好。这是因为输送带的耐热性以三元乙丙橡胶为封面层,骨架材料采用国内特有的耐高温帆布,独特的配方设计,解决了三元乙丙橡胶饱和度高、附着力差、层间附着力低的问题。耐热输送带分为普通耐热输送带和强耐热输送带。普通耐热热带强层为涤棉帆布(CC56),耐热热带强层为EP(具体为EP100、EP150、EP200、EP250、EP300、EP350、EP400等)。耐高温输送带输送烧结矿、焦炭、水泥熟料等高温物料,在物料温度不超过800℃、表面温度不超过220℃的情况下使用。输送带主要用于冶金、建筑等行业。

  2. The most prominent characteristics of heat-resistant conveyor belt are light body, long service life (about 2-4 times), good heat resistance. This is because the heat resistance of the conveyor belt takes EPDM as the cover layer, the skeleton material adopts the domestic special high temperature canvas, and the unique formula design solves the problems of high saturation, poor adhesion and low interlayer adhesion of EPDM. Heat-resistant conveyor belt is divided into ordinary heat-resistant conveyor belt and strong heat-resistant conveyor belt. Common heat-resistant tropical strong layer is polyester-cotton canvas (CC56), heat-resistant tropical strong layer is EP (EP100, EP150, EP200, EP250, EP300, EP350, EP400, etc.). High-temperature conveyor belt conveys sinter, coke, cement clinker and other high-temperature materials. It is used when the material temperature does not exceed 800 ~C and the surface temperature does not exceed 220 ~C. Conveyor belt is mainly used in metallurgy, construction and other industries.

  通过输送带厂家介绍耐热输送带主要用于冶金、建筑等行业你了解吗?想要学习的输送带知识请继续关注我们。

  Through the introduction of conveyor belt manufacturers, heat-resistant conveyor belt is mainly used in metallurgy, construction and other industries. Do you know? If you want to learn more about conveyor belt, please continue to pay attention to us.