随着社会的快速发展，机械化生产逐渐取代了手工生产，输送带是物料或单项物品的主要运输方式，这也受到了许多厂家的欢迎。
With the rapid development of society, mechanized production has gradually replaced manual production. Conveyor belt is the main mode of transportation of materials or individual items, which is also welcomed by many manufacturers.
只要是输送带，它必须连接成一个圆环才能使用，所以输送带的连接是一个非常关键的环节。接头的质量直接影响输送带的使用寿命，以及输送带线能否平稳运行。接下来，将介绍几种常用方法的区别:
As long as it is a conveyor belt, it must be connected into a ring to use, so the connection of the conveyor belt is a very critical link. The quality of the joint directly affects the service life of the conveyor belt and the smooth operation of the conveyor belt line. Next, we will introduce the differences of several common methods:
输送带接头:机械接头、冷接头、热硫化接头等常用方法。
Conveyor belt joints: mechanical joints, cold joints, hot vulcanized joints and other common methods.
1. 机械连接一般是指使用搭扣连接。这种连接方式方便经济，但接头效率低，易损坏，对输送带的使用寿命有一定的影响。在PVC、PVG全芯阻燃防静电输送带接头中，本产品一般用于8级以下产品。
1. Mechanical connection generally refers to the use of buckle connection. This connection mode is convenient and economical, but the joint efficiency is low and easy to be damaged, which has a certain impact on the service life of the conveyor belt. In the joints of PVC and PVG full core flame retardant and antistatic conveyor belts, this product is generally used for products below grade 8.
2、浙江物流输送带热硫化接头，实践证明是一种理想的接头方法，可以保证接头效率相对较高，而且非常稳定，接头寿命非常长，易于掌握。但也存在工艺繁琐、成本高、运行时间长等缺点。
2. The hot vulcanized joint of Zhejiang logistics conveyor belt has been proved to be an ideal joint method, which can ensure that the joint efficiency is relatively high, and it is very stable. The service life of the joint is very long and easy to grasp. But there are also some shortcomings such as cumbersome process, high cost and long running time.
3、冷胶接头，即使用冷胶接头。这种连接方式比机械连接更高效、经济，应该会有更好的效果，但在实践中，由于难以掌握工艺条件，胶粘剂的质量对连接有很大的影响，所以并不十分稳定。
3. Cold glue joint, even if cold glue joint is used. This connection method is more efficient and economical than mechanical connection. It should have better effect. But in practice, because it is difficult to master the process conditions, the quality of adhesive has a great impact on the connection, so it is not very stable.
