橡胶输送带一般是由几层复合,如果表面损坏输送带传送带随意丢弃,会造成资源的浪费,在正常情况下操作员现场维护的传送带,压后形成一个新图层,但在输送机设备操作更浪费时间,所以输送带的现场快速修复成为一个需要解决的问题。下面来介绍一下大倾角输送带现场快速修复的方法。
Rubber conveyor belt is generally composed of several layers. If the surface is damaged, the conveyor belt will be discarded at will, which will cause waste of resources. Under normal circumstances, the conveyor belt maintained by the operator on site will form a new layer after pressing, but the operation of the conveyor equipment will waste more time, so the on-site rapid repair of the conveyor belt becomes a problem to be solved. Here's how to quickly repair the conveyor belt on site.
输送带制造商之所以能够实现这一目标,是基于一种名为重型输送带前端的科学加工工具,它主要包括传动、受损层的切割和切割机的出砂面。该工具还包括电动机和电气控制箱,电动机驱动由电气控制箱控制。
The conveyor belt manufacturer is able to achieve this goal based on a scientific processing tool called the front end of heavy conveyor belt, which mainly includes transmission, cutting of damaged layer and sanding surface of cutting machine. The tool also includes a motor and an electrical control box, and the motor drive is controlled by the electrical control box.
发射机的主要结构为:设备输出辊、转移辊输送线,在输出辊上卷好修复的传送带,依靠旋转输出向前运行,输出辊的底部是切削结构损伤层,通过辊辊和上辊切刀在一起,两个之间的距离可以基于传送带的厚度做出相应的调整,通过传送带辊之间的间隙和切刀,刀口将损伤层删除,通常有一个明确的输送线结构,接近顶部的传动辊安装可以电动快速旋转辊,表面是配备清洁刷,可以快速波兰的切削表面受损的传送带。
The main structure of the transmitter is: equipment output roller and transfer roller conveyor line, roll the repaired conveyor belt on the output roller, run forward by rotating output, and the bottom of the output roller is the cutting structure damage layer. The distance between the two can be adjusted based on the thickness of the conveyor belt through the gap between the roller and the cutter, and the knife edge will be damaged Layer removal, usually with a clear conveyor line structure, near the top of the drive roller installation can be electric fast rotation roller, the surface is equipped with a cleaning brush, can quickly polish the cutting surface of the damaged conveyor belt.