1、冷粘接头。即采用冷粘粘合剂来停止接头。
1. Cold bonded joints. That is to say, cold adhesive is used to stop the joint.
优点：这种接头方法比机械接头的效率高，也比拟经济，应该能够有比拟好的接头效果，但是从理论来看
Advantages: This kind of joint method is more efficient and economical than mechanical joint. It should be able to have better joint effect, but from the theoretical point of view.
缺陷：由于工艺条件比拟难控制(熟知并能运用) ，另外粘合剂的质量对接头的影响十分大，所以不是很稳定（解释:稳定安定；没有变动)。用冷粘胶粘接相当于保送带本身强度的40%-55%。
Defects: Because the process conditions are difficult to control (familiar and applicable), and the quality of adhesives has a great impact on the joint, so it is not very stable (Interpretation: stable; no change). Adhesion with cold adhesive is equivalent to 40%-55% of the strength of the belt itself.
2、机械接头。橡胶保送带有耐热带、耐磨带、耐灼烧带、耐油带、耐碱带、耐碱带、耐热带、耐寒带等特性。 主要用于各矿山、冶金、钢铁、煤炭、水电、建材、化工、粮食等企业的固体物料保送。
2. Mechanical joint. Rubber delivery belt has the characteristics of tropical, wear-resistant, burning-resistant, oil-resistant, alkali-resistant, alkali-resistant, tropical and cold-resistant. Mainly used for solid material delivery in mining, metallurgy, iron and steel, coal, hydropower, building materials, chemical industry, grain and other enterprises.
优点：普通是指运用皮带扣接头，这种接头办法便当便利，也比拟经济，聚氯乙烯和PVG整芯阻燃抗静电（是一种处于静止状态的电荷）保送带接头中，普通8级带以下的产品都采用这种接头办法。
Advantages: Usually refers to the use of belt buckle joints, which are convenient and economical. In the PVC and PVG whole core flame retardant and antistatic (a static charge) belt joints, the common products below 8 bands all use this kind of joint method.
不好的中央：但是接头的效率低，容易损坏，对保送带产品的运用寿命有一定影响。用卡扣衔接相当于保送带本身强度的28%-45%。
Poor center: But the efficiency of the joint is low and easy to damage, which has a certain impact on the service life of the belt products. The strength of the belt itself is 28% - 45% by using the card buckle.
3、热硫化接头。
3. Thermal vulcanized joints.
优点：理论证明是理想的一种接头办法，能够保证高的接头效率，同时也十分稳定（解释:稳定安定；没有变动)，接头寿命也很长，容易控制(熟知并能运用) 。保送带厂家是带式保送机的主要部件，主要用于煤炭、矿山、冶金、化工、建筑和交通等部门的大范围连续化运输，运输的物料分为块状、粉状、糊状和成件物品等。从微观构成来看，保送带主要由骨架资料、掩盖层及打底资料三大局部组成，其中掩盖层为决议其性能及用处的关键局部。
Advantages: The theory proves to be the most ideal joint method, which can ensure high joint efficiency, but also very stable (explanation: stable stability; no change), long service life of the joint, easy to control (well-known and can be used). Belt manufacturer is the main component of belt conveyor. It is mainly used for large-scale continuous transportation of coal, mining, metallurgy, chemical industry, construction and transportation departments. The materials transported are divided into block, powder, paste and parts. From the microscopic point of view, the delivery belt mainly consists of three parts: skeleton data, cover layer and bottom-up data. The cover layer is the key part to determine its performance and use.
不好的中央：但是存在工艺费事、费用高、接头时间长等缺陷。用机械热硫化粘结相当于保送带本身强度的60%-80%。
Poor center: But there are some defects, such as technics trouble, high cost, long connection time and so on. The mechanical thermal vulcanization bonding is equivalent to 60%-80% of the strength of the belt itself.
本文由大倾角输送带进行编写，想要了解的产品及更详细的精彩内容，请关注我们的官方网站：http://www.everla.cn。
This article is written by the steep inclined conveyor belt. For more products and more details, please pay attention to our official website: http://www.everla.cn.
