随着产业带的逐步普及，产业带的种类越来越多，质量也在不断提高。今天小编为大家介绍的是花纹输送带，目前国内花纹输送带的设计技术越来越精湛，也是机械输送带领域不断创新的动力。
With the gradual popularization of industrial belts, there are more and more types of industrial belts, and the quality is also improving. Today, Xiaobian is introducing the pattern conveyor belt. At present, the design technology of the pattern conveyor belt in China is more and more exquisite, and it is also the driving force of continuous innovation in the mechanical conveyor leading area.
花纹输送带的种类也是复杂多样的，其中使用人字形输送带、条纹花纹输送带、颗粒花纹输送带和扇形花纹输送带较为常见。当然，这些类型的输送带有一些不同之处。以下是花纹输送带生产厂家介绍花纹输送带的特点和用途:
The types of patterned conveyor belts are also complex and varied, among which herringbone conveyor belts, striped conveyor belts, grain-patterned conveyor belts and fan-patterned conveyor belts are more common. Of course, there are some differences between these types of conveyors. The following are the characteristics and uses of the pattern conveyor belt introduced by the pattern conveyor belt manufacturer.
1. 隐藏式输送带的特点:在比输送带本体高的表面有“隐藏式”花纹。图案可以是开的，也可以是闭的，每一种图案都可以分为三种:高、中、低。适用于输送粉状、颗粒状、小颗粒状或袋状物料。
1. The characteristics of concealed conveyor belt: there are "concealed" patterns on the surface higher than the conveyor belt body. Patterns can be open or closed. Each pattern can be divided into three types: high, medium and low. It is suitable for conveying powder, granular, small granular or bag materials.
2. 带型输送带的特点:带型输送带表面有高于带体的带型。图案分为三种类型:高、中、低。适用于倾角≤30度的水平输送包装。若在凹槽内，可更换人字形。
2. The characteristics of belt conveyor belt: the surface of belt conveyor belt is higher than that of belt body. Patterns are divided into three types: high, medium and low. It is suitable for horizontal conveying packaging with inclination less than 30 degrees. If in the groove, the herringbone can be replaced.
3.颗粒状和坑状输送带的特点:在输送带表面有高于带体的颗粒状图案，或嵌入在带体内的凹面，坑状图案也可制成方孔或棱柱状图案和布样。顶部的颗粒花纹，适用于软包装或物料运输(如纸箱)，不需滑动。坑形颗粒花纹适用于输送≤45度倾角的颗粒物质。
3. The characteristics of granular and pitted conveyor belts: on the surface of conveyor belts, there is a granular pattern higher than the belt body, or the concave surface embedded in the belt body. The pit pattern can also be made into square or prismatic patterns and patterns. The top grain pattern is suitable for soft packaging or material transportation (such as carton), without sliding. The pit-shaped grain pattern is suitable for conveying particulate matter with an inclination of less than 45 degrees.
4. 扇形输送带特点:输送带表面有半扇形(或1/4圆)花纹。当胶带成槽状组合成扇形(或半圆形)时，属高花纹类。适用于输送角度≤60度的粉状、颗粒状、块状物料。
4. Sector conveyor belt characteristics: conveyor belt surface has semi-sector (or 1/4 circle) pattern. When the tape is grooved and combined into a fan (or semi-circle), it belongs to the category of high pattern. It is suitable for conveying powder, granular and bulk materials whose angle is less than 60 degrees.
