欢迎访问擎川机电设备有限公司网站!
定制咨询热线13533070862
擎川EVERLA > 知识问答 > 输送带皮带表面的油漆怎么清洁!

知识问答

联系我们

擎川机电设备有限公司

邮 箱:everlas@163.com
手 机:135-3307-0862
电 话:400-9688-278
地 址:广东省广州市天河区东圃镇宦溪西路宦溪工业区12号A栋

输送带皮带表面的油漆怎么清洁!

作者:擎川EVERLA输送带厂家 来源: 网络整理 更新时间:2021-07-16 11:45:56人气:

橡胶输送带广泛应用在许多行业,在使用的过程中,橡胶输送带将接触的表面材料,导致表面仍将一些材料,有些材料只要干净,但是一些污染表面的橡胶输送带材料不容易清洁,如油漆。以下输送带厂家带您详细了解如何清洁橡胶输送带表面的油漆。

  Rubber conveyor belts are widely used in many industries. In the process of use, the surface materials of rubber conveyor belts will contact, leading to the surface will still have some materials, some materials as long as clean, but some of the rubber conveyor belt materials polluted the surface are not easy to clean, such as paint. Below conveyor belt manufacturers take you to know in detail how to clean the rubber conveyor belt surface paint.



  油漆是涂料的一种化学混合物,具有很强的遮盖能力,所以一旦接触就很难去除。通常我们知道油漆要选择化学溶剂来溶解油漆,但对于橡胶输送带则不能如此,以免对其造成损害。橡胶输送带是带式输送机的主要传动部分,它的正常使用也需要托辊,所以如果你要更换橡胶输送带,你可以顺便了解一下托辊的更换技术,以后可能会用到。

  Paint is a kind of chemical mixture of paint, which has strong covering ability, so it is difficult to remove once it is touched. Usually we know that paint should be dissolved by chemical solvent, but not for rubber conveyor belts to avoid damage. Rubber conveyor belt is the main transmission part of belt conveyor, its normal use also requires supporting rollers, so if you want to replace rubber conveyor belt, you can conveniently understand the replacement technology of supporting rollers, which may be used in the future.

  考虑到这两种油漆都可以是透明的,而且不会损坏输送带的橡胶表面,所以只能选择丙酮或吡咯烷酮,这两种化学溶剂都可以满足要求。然而,这些溶剂很容易对皮肤造成伤害,所以使用时要戴上乳胶手套和口罩,并采取适当的防护措施。之所以设计这样一款产品,主要是利用托架的托架为角钢这一特点,可以将橡胶带顶到所需的高度,这样就可以很方便的拆卸安装托辊元件。该装置携带也更加方便,从而更好的保证了输送带辊的正常使用。

  Considering that both paints can be transparent and do not damage the rubber surface of the conveyor belt, only acetone or pyrrolidone can be chosen. Both of these chemical solvents can meet the requirements. However, these solvents can easily cause skin damage, so latex gloves and masks should be worn and appropriate protective measures should be taken. The main reason for designing such a product is that the bracket of the bracket is angle steel, which can top the rubber belt to the required height, so that the bracket components can be easily disassembled and installed. The device is also more convenient to carry, thus better ensuring the normal use of conveyor belt rollers.

  以上是输送带厂家介绍的清洗胶带胶带表面的方法,希望对您有所帮助。关于输送带的信息请关注我们的网站了解,如果您想购买或使用输送带过程中遇到的问题,欢迎与我们联系,我们将为您聆听的产品和服务。

  Above is the method of cleaning belt surface introduced by conveyor belt manufacturer. I hope it will be helpful to you. For more information about conveyor belts, please pay attention to our website. If you want to buy or use conveyor belts, you are welcome to contact us. We will listen to professional products and services for you.