众所周知,尼龙输送带不同机器在工厂的时间好尼龙输送带设计规范和要求,所以在安装时传送带的设计、安装、尼龙输送带选购,否则会影响后续的使用,下面将介绍尼龙输送带的安装时应该注意什么问题。
As we all know, different machines of nylon conveyor belt have good design specifications and requirements for nylon conveyor belt in the factory. Therefore, the design, installation and purchase of nylon conveyor belt during installation will affect the subsequent use. What should be paid attention to during the installation of nylon conveyor belt will be introduced below.
1. 无论是安装新的输送带还是更换旧的输送带，都需要对输送带进行规划计算。如果使用不合适的输送带，配重很容易掉到地上，否则输送带启动时就会滑倒，无法正常运行。
1. Whether it is to install a new conveyor belt or replace an old one, it is necessary to plan and calculate the conveyor belt. If the improper conveyor belt is used, the counterweight can easily fall to the ground, otherwise, the conveyor belt will slide when it is started and cannot operate normally.
2. 有时，尼龙输送带安装后，机器运行正常，但一段时间后，输送带开始撞击地面。这是因为在安装过程中忽略了输送带在运行过程中会发生的塑性变形和弹性变形。为了防止这种情况的发生，在安装输送带时，必须给输送带留出一定的空间，以防止后续的情况发生。
2. Sometimes, after the nylon conveyor belt is installed, the machine runs normally, but after a period of time, the conveyor belt begins to hit the ground. This is because the plastic deformation and elastic deformation of the conveyor belt during operation are ignored during installation. In order to prevent this situation, when installing the conveyor belt, a certain space must be reserved for the conveyor belt to prevent the subsequent situation.
3.更理想、更合适的输送带安装方案应考虑季节温度的变化，尤其是夏季温度高时输送带膨胀率增大，冬季温度低时输送带膨胀率减小。另外，输送带安装好后，输送带长度要适中。为了防止输送带出现问题，在安装过程中更好留有一个接头余量，便于后续的维修和处理。
3. The most ideal and suitable installation scheme of conveyor belt should consider the change of seasonal temperature, especially when the temperature is high in summer, the expansion rate of conveyor belt increases, and when the temperature is low in winter, the expansion rate of conveyor belt decreases. In addition, after the conveyor belt is installed, the conveyor belt length shall be moderate. In order to prevent the conveyor belt from problems, it is better to leave a joint allowance during the installation process for subsequent maintenance and treatment.
看了上面简单介绍的尼龙输送带的安装，想必大家都知道如何安装尼龙输送带，希望能在实际情况中能够有效的帮助你。
Looking at the installation of nylon conveyor belt briefly introduced above, I think everyone knows how to install nylon conveyor belt, hoping to help you effectively in the actual situation.
