橡胶环形输送带是指生产过程已将输送带制成无接头的环形输送带，其带芯接头处强力可达到胶带本体强力的90%，胶带表面无明显接头缺陷，因此，胶带运输平衡，使用伸长小;带芯采用**全棉或维棉交织帆布制成。
Rubber ring conveyor belt refers to the belt has been made into a ring conveyor belt without joint in the production process. The strength of the belt core joint can reach 90% of the strength of the belt body, and there is no obvious joint defect on the surface of the tape. Therefore, the belt transportation is balanced and the use elongation is small; The core is made of * * cotton or Uygur cotton woven canvas.
技术指标：
Technical index:
橡胶环形输送带按带体拉伸强度可分为M、L、H等型号、其相应拉伸强度如下：
According to the tensile strength of the belt, rubber ring conveyor belt can be divided into m, l, h and other models, and its corresponding tensile strength is as follows:
M型：其带芯系用**维棉交织帆布、一般2-6层、胶厚度约7.5mm-20mm; L型系用NN-200型尼帆布(或聚酯帆布>作强力层、一般2-6层、胶厚度7.500mm-20mm。
M type: the core system is made of * * cotton woven canvas, generally 2-6 layers, and the glue thickness is about 7.5mm-20mm; The L-type is made of NN-200 type canvas (or polyester canvas > as the strong layer, 2-6 layers in general, and the glue thickness is 7.500mm-20mm).
H型：用NN-300型尼龙帆布(或聚酯帆布>作强力层、一般2-4层、胶带总厚度7.500mm-20mm。
Type H: nn-300 nylon canvas (or polyester canvas > is used as strength layer, 2-4 layers in general, and the total thickness of tape is 7.500mm-20mm).
胶带**大宽度为3100mm、按照作用性能、可提供普通型、耐热型、耐寒型(不低于-4℃>耐酸碱型、导静电型、耐高温型(不高于150℃>及卫生型等。
The tape * * is 3100mm wide, and can provide ordinary, heat-resistant, cold resistant (not less than-4 ℃ > acid alkali resistant, electrostatic, high temperature resistant (not higher than 150 ℃ > and sanitary type, etc.) according to the function performance.
在使用环形输送带时要注意以下事项：
When using the ring conveyor belt, the following matters shall be noted:
<1>不要让物料覆盖托辊、保持托辊润滑、以免造成其回转不灵通;
<1> Do not let the material cover the roller, keep the roller lubricated, so as to avoid its rotation is not smooth;
<2>环形输送带不要超负荷启动;
<2> The ring conveyor belt shall not be started under overload;
<3>当我们发现环形输送带跑偏时、要及时纠正、以免造成环形输送带的断裂、影响正常工作;
<3> When we find out that the belt is out of alignment, it should be corrected in time to avoid the fracture of the belt and affect the normal operation;
<4>发现环形输送带有破损要及时修补、以免破损扩大、影响其正常运转;
<4> If the ring conveyor belt is found to be damaged, it should be repaired in time to avoid the damage expanding and affecting its normal operation;
<5>要注意避免机架、支柱或块状物料对环形输送带阻滞。
<5> Care should be taken to avoid blocking the belt by rack, strut or block material.
pvc环形输送带介绍：
PVC ring conveyor belt introduction:
PVC输送带其胶面材质为聚氯乙烯(Polyvinylchloride，PVC)，其构成为聚酯纤维布和聚氯乙烯胶构成。其工作温度一般为-10°到+80°，其接头方式一般为齿形接头，横向稳定性良好适宜各种复杂环境下传输。
PVC conveyor belt is made of polyvinylchloride (PVC), which is made of polyester fiber cloth and PVC adhesive. The operating temperature is generally -10 ° To +80 °， The joint is generally international tooth joint, and the lateral stability is good and suitable for transmission in various complex environments.
购买产品重要的是质量，选择商家选择是诚信，山东输送带批发真诚的为广大客户提供优良的服务，欢迎大家在网站：http://www.everla.cn下方留言咨询.
The important thing to buy products is quality. It is good faith to choose the business. Shandong conveyor belt wholesale and sincere to provide excellent service for the customers. Welcome to the website: http://www.everla.cn Below message consultation
